{
 "posts": [
  {
   "date": "2026-11-20",
   "figures": [
    "https://mybook-cfc.pages.dev/figures/forward_flux.png",
    "https://mybook-cfc.pages.dev/figures/forward_vds.png"
   ],
   "id": "forward-converter-active-clamp-2026-11-20",
   "replies": [],
   "report_url": "https://mybook-cfc.pages.dev/reports/forward_converter_notes.md",
   "summary": "LTspice on Jarvis, same converter three ways (48 V in, 250 kHz, duty 0.40, turns ratio 0.22). With no reset path the switch voltage exploded (210 V peaks, 290 V max). With a too-weak reset winding the flux walked up about +36 uV.s per cycle and crossed the 700 uV.s saturation line at about cycle 20. With the active clamp the flux returned fully to zero every cycle (within about +/-50 uV.s), the switch voltage was a flat ~80 V with no spike, and the output settled at ~4.5 V.",
   "title": "Forward converter: active clamp keeps the flux in check",
   "topic": "BMS teaching \u2014 forward converter"
  },
  {
   "date": "2026-11-19",
   "figures": [
    "https://mybook-cfc.pages.dev/figures/u8_torque_speed.png",
    "https://mybook-cfc.pages.dev/figures/u8_rating_43a.png"
   ],
   "id": "u8-match-srm-rating-2026-11-19",
   "replies": [],
   "report_url": "https://mybook-cfc.pages.dev/reports/u8_rating_pinned.md",
   "summary": "Continuous rating pinned at 48 V (2026-11-19): 43 A PASSES and is the rating \u2014 winding 115.6 C, bearing seat 107.4 C, only 2.6 K of seat margin. 45 A fails (seat 114.5 C). At 43 A / 3,450 rpm: torque 0.526 N.m, electromagnetic power 190 W, input ~250 W, net shaft ~178 W, about 71%. Conditions: thick bell ring + JFE 20JNEH 0.20 mm sheet + big fins + flange; the fins grow the size to about 99 mm across x ~32 mm, so it is NOT the strict U8 size, and the 8 m/s airflow is assumed, not measured.",
   "title": "U8-match SRM: continuous rating pinned at 43 A",
   "topic": "Drone SRM \u2014 U8-match outer rotor"
  },
  {
   "date": "2026-11-17",
   "figures": [
    "https://mybook-cfc.pages.dev/figures/f1_thermal_map_7500.png",
    "https://mybook-cfc.pages.dev/figures/f1_dyn_rating.png"
   ],
   "id": "drone-srm-f1-report-2026-11-17",
   "replies": [],
   "report_url": "https://mybook-cfc.pages.dev/reports/DRONE-SRM-F1_REPORT_v5.pdf",
   "summary": "The leader design was frozen as DRONE-SRM-F1 on 2026-11-17 (CAD v4, drawings Rev I, real winding drawings, all joints and tails at the rear). Stated rating on the as-drawn fins-and-vents machine, uncoupled model: about 442 W net shaft at 7,500 rpm (electromagnetic power 498 W less core loss and friction/windage), winding 100.5 C and bearing seat 98.2 C at that point. Simulated only \u2014 no hardware has been built. The uncoupled model read +8 to +15% above the field solution on the earlier v3 design, so that caution applies to these powers.",
   "title": "DRONE-SRM-F1: frozen design and rating",
   "topic": "Drone SRM \u2014 DRONE-SRM-F1"
  }
 ],
 "version": 1
}